How to Reset Printer Canon Ip2770

How to Reset a Canon Ip2770 Printer
Why canon ip 2770 printer should be reset?

How to Reset Canon Ip2770 Printer Permanently?

The use of printers is limited by vendors to maintain the quality of the printer itself, usually by calculating the print out on the printer sytem that is planted in the bios printer chip. The calculation is recorded and arranged in an EEPROM chip on the mainboard printer so that when it has reached the maximum limit of calculation the printer will show information in the form of blinking or error code where the printer is silent without response.

This process is also done by the vendor with a reason to keep the excess ink outside the capacity of the ink so that the ink does not spill out the printer or even can cause a short connection to the components in the printer.

For this time we will discuss how to reset canon ip2770 printer marked with Error 5200 Waste ink Tank Absorber Full or blinking code 8x (orange resume button blinking alternately with power button as pause).

How-Reset-Printer-Canon-PIXMA-IP2770.jpg
The need to remember when the printer reset is:

Make sure you know the printer brand and its series.
Download the resetter software according to your printer, the easy way to get it is with Google search engine.
For canon printer type you can use resetter version 3400 which sdah can be used for all Canon printer type.
Make sure your printer is On when it resets.
Before you can to reset the canon printer, first make sure the printer terlah enter in service mode conditions.


How to Sign in to Service Mode iP2770:

The printer is off and the power cord is plugged in.
Press the RESUME button then press the POWER button until the green light is on (when pressing POWER button, RESUME button is removed first)
Then release the RESUME button, but do not release the POWER button.
While the POWER button is still depressed, press the RESUME button 5 times. Led will turn green orange with the last flame orange. Then ...
Release both buttons simultaneously.
Led will blink briefly then it will flame GREEN.
Computer will detect new device, ignore it ... ..
This indicates that the iP2770 printer is in a SERVICE MODE state and ready to reset.
How to Reset Canon iP2770 error 5200 on hardware:

Turn on the printer, and the printer will look normal.
Run printer to print document or print test, then error 5200 will appear.
Immediately unplug the power cord without pressing the on-off button
Open and slide the catridge to the middle manually (press the white lock latch on the back of the head, so the cartridge can be pulled to the center)
Unplug all cartridges and leave the lid open
Turn on the printer, the head will move crashing left and right because the lid is still open and will stop in the middle.
Reinstall the cartridge, and close it properly
Your printer will return to normal.
How to Reset Canon iP2770 Using Reseter Software

Service-tool-v3400.jpg

Make sure the printer conditions in the SERVICE MODE position as above, then run Software Resetter iP2770 v3400 that you downloaded:

Exctract File Resetter iP2770.
Prepare 2 papers in printer (this is for print at reset time).
Run the program Resetter iP2770
Click "SET" by setting the Clear Ink Counter Main position, then the printer will proceed, then iP2770 will print one page with the words "D = 000.0"
Click "SET" with the Ink Absorber Counter setting of Main position, then the printer will proceed, then click OK
Then click "EEPROM", and the printer will print the result of Resetter iP2770. One line of his writing as follows:
"TPAGE (TTL = 00000)"
Turn off the Printer by pressing POWER button.
Printer ready to diguankan
More details can read the full ip2770 canon error code

Canon MP287 Printer Error Code and How to Fix it

Canon MP287 Printer Error Code and How to Fix it

Error Code Printer Canon MP287

How to repair damage Canon Pixma MP 287 Printer with Error Code displayed on Canon Printer MP 287 such as Printer Out Of Paper, Paper Jammed, The Ink Has Run Out. The Canon MP 277 Printer Error Code is the same as the Error code on the Canon MP 258 Printer, error code on PrinterCanon MP 287 All in One Multifunction is usually displayed on the LED in the Canon MP 287 Printer.

When an error occurs on the Canon MP 287 Printer the alarm light is lit yellow and will give rise to Letter E for Error with error code such as E 02, E05, E 08 and others or also accompanied by Letter P for Power with Error code such as P 02, P10. So after the display error code on the LED then check the Error Code on Canon MP 287 Printer.

Canon MP 287 Printer Error Code And How To Fix and Troubleshoot Canon MP 287 Printer;

Error Code E

E02: Printer is Out of Paper, paper does not go well

Solution:

Load paper correctly
E03: Paper Jammed, Paper Jam

Solution:

Reload Paper correctly.
Check if anything is blocking the entry of the paper
Check the paper roller whether it works properly or not
Check the reader of the paper sensor next to the paper roller, if damaged immediately replace
E04: The FINE Cartridge can not be recognized

Catridge canon MP287 is not installed properly

Solution:

Remove Catridge,
Clean it, keep plugging it in again
E05: The FINE Cartridge can not be recognized

Catridge is not installed completely, or there is one broken

Solution:

Remove the Catridge and clean it and then plug it in again.
Replace Catridge
E07: The FINE Cartridge is not installed in the correct position, The cartridge is not installed in the correct position

Solution:

Check that the Black / Color Cartridge is in the correct position.
Printer Need to be reset
E08: Ink absorber is almost full, Ink Absorber is almost full

Solution:

The printer needs to be reset with the software
E13 and E16: Ink has run out

Solution:

Press the STOP / RESUME button until the indicator display proceeds and shows the number 1
Button-resume-canon-mp287

Error Code P

P02: Carriage error

Solution:

Check the printer roll,
If there are foreign objects that enter
Clean the encoder
P03: Line feed error

Solution:

Check the disc sensor timing
Check and clean the mainboard
P05: ASF sensor error

Solution: Replace one of the parts:

ASF sensor unit
Motorcycle
Board
P06: Internal temperature error (excessive heat)

Solution:

Clean the inside of the printer,
Clean the sensor on the catrid,
Change board
P07: Full absorber ink

Solution:

Reset printer with program
P08: Print head temperature rise error (head overheated, over limit)

Solution:

Replace Catridge color
P09: EEPROM error

Solsui:

EEprom board corrupted,
Change board
P10 / B200: error uncertain due to the failure of parts in general
Cause: The catridge is left blank and is used for continuous printing. Consequently heat and damage occurs in one of the following components: Logic Board / Carriage Unit / Second Catridge.
Solution: Replace One of the above components of the order of the easiest and cheapest.

P15: USB VBUS over current

Cause: The printer is overcurrent from the Canon MP287 Printer USB cable.
Solution:
1. Try Replace USB Cable Printer Canon MP287.
2. If still damaged, replace Canon MP287 Printer Board.

P20: Other hardware error

Solution:

Other hardware damage
Change the mainboad
P22: Scanner error (Scaner not working)

Solution:

Replace the scanner
Replace board

For mp237 multifunctional canon type that does not have led can read 11 error code canon mp237 printer in the previous post.

Printer Error Code Canon MP237

11 Printer Error Code Canon MP237

11 Printer Error Codes Canon MP237 - Canon printer as one of the largest print media manufacturers in the world has one of the features facilitate every user of the printer in repairing and analyzing the problems that occur on the canon printer, that is by providing error codes that are compiled in such a way A way to show errors that occur in the printer as information about errors that occur.

Generally this error in the form of blinking (LED) orange lights and display error messages through the code (can be on the screen monitor computer or printer).

List of Canon MP237 Printer Error

Error 1000 Canon MP237 - The printer is out of paper / paper does not feed with the blinking 2 times on the canon printer MP 237 and to fix it insert the paper into the rear tray and press the Black / Color button on the Printer

Error 1300 Canon MP237 - This error is a jamed paper marked 3 times on the canon printer mp237, usually this error occurs because there is paper stuck in the printer, try to find and remove the paper so that no longer jamed paper.

Error 1486, 1487 Canon Mp237 - Error Catridge printer (FINE Cartridge is not installed in the correct position) is indicated by blinking / blink 7 times in the printer, This error occurs because the Catridge is not installed properly and fitting, the fix is ​​to fix And reinstall catridge make sure it is installed properly) if still happened try with new catridge.

Error 1687 Canon Mp237 - Printer Fault Cartridge (The FINE Cartridge is not installed properly) is indicated by blinking / blink 4 times on the printer, This error occurs because the Catridge is not installed properly and has been locked).

Error 1401, 1403, 1401 Canon MP237 - Printer Fault Cartridge (The FINE Cartridge is not installed properly) is indicated by blinking / blink 5 times in printer, how to solve Error is same as 2 error above that is by installing cartridge correctly if still Replace cartridge with new one.
Error 1700 canon MP237 - Error The printer ink (Ink absorber is almost ful) is indicated by blinking / blink 8 times on canon mp237 printer, how to solve this error by performing cleaninng head totally on canon mp237 printer.

Error 1684 canon Mp237 - Error catridge printer (The FINE cartridge can not be recognized) is marked with blinking / blink lights 14 times. This error is the same as the above is a problem with the installation of catridge or printer can be catridge error / damaged so it can not be read, how to solve it by reinstalling, if not can replace with new catridge.

Error 1688 Canon MP237 - The Ink has run out error is indicated by blinking / blinking 16 times on the printer, resolving "stop / reset" button for 5 seconds.

Error 1686 Canon MP237 - Ink Error (The remaining ink level can not be detected) is indicated by blinking light / blink 13 times, This error occurs because the printer can not detect the ink level, how to resolve this error "press stop / reset" during 5 seconds.

Error 5100 Canon MP237 - Paper Jamed is indicated by blinking / blinking 2 times in the printer, This error is the same as Error 1300 canon mp237 printer, there may be some paper scraps in the printer, pull and take the remaining paper.

Error B200 Canon MP237 - Error Printer Status is marked with blink 10 times on the printer, this error occurs because the printer has a high temperature rise, it could be due to too much print, or the temperature of the power supply is too high, how to solve this error we live off Power cable connected to power for several minutes, to keep the temperature down.

Well that's the list of Canon MP237 Printer Error and how to solve it, with this list of error codes we will be more easily directed to overcome the problem. For Canon Ip2770 can be read in 8 canon ip2770 error code.

8 Printer Error Codes Canon Ip 2770 And How To Fix It

8 Printer Error Codes Canon Ip 2770 And How To Fix It

Most canon printer users who experience errors on their printers often do not know what the error means, the printer error signals are shown on the printer lights that have ngeblink or have a message on the monitor screen.

Here are 8 canon ip2770 printer error codes that usually occur along with solutions to overcome them:

3x Orange 1x green: There are foreign objects that enter into the printer, usually on the roller or damage to the mechanical printer.
4x blink Orange 1x green: Waste Ink Pad Full. How to solve this problem is to reset the printer with the software.
5x Blink Orange 1x Green: There is damage to hint or color cartridge. The fix is ​​by cleaning the cartridge chip using a tissue or replace a new cartridge.
7x Blink Orange 1x green: There was damage to the color cartridge
7x blink Orange and green alternately: Waste Ink Pad Full, Full Ink Absorber. The solution to solve this problem is to absorb the ink that fills the inside of the printer, then reset the printer using software.
8x Blink Orange 1x Green: Ink tank full. The solution to this problem is to reset the printer using the printer.
13x / 16x blink Orange 1x green: Cartridge is not installed properly. To solve this problem check back the cartridge, or press the reset button for 10 seconds.
14x / 15x Blink Orange 1x Green: Black Cartridge Damaged. The solution is to replace the cartridge
Button-resume-canon-ip2770

Well that's the list of Canon Ip2770 Error Printer and how to solve it, with this list of error codes we will be more easily directed to overcome the problem.