Why canon ip 2770 printer should be reset?
The use of printers is limited by vendors to maintain the quality of the printer itself, usually by calculating the print out on the printer sytem that is planted in the bios printer chip. The calculation is recorded and arranged in an EEPROM chip on the mainboard printer so that when it has reached the maximum limit of calculation the printer will show information in the form of blinking or error code where the printer is silent without response.
This process is also done by the vendor with a reason to keep the excess ink outside the capacity of the ink so that the ink does not spill out the printer or even can cause a short connection to the components in the printer.
For this time we will discuss how to reset canon ip2770 printer marked with Error 5200 Waste ink Tank Absorber Full or blinking code 8x (orange resume button blinking alternately with power button as pause).
How-Reset-Printer-Canon-PIXMA-IP2770.jpg
The need to remember when the printer reset is:
Make sure you know the printer brand and its series.
Download the resetter software according to your printer, the easy way to get it is with Google search engine.
For canon printer type you can use resetter version 3400 which sdah can be used for all Canon printer type.
Make sure your printer is On when it resets.
Before you can to reset the canon printer, first make sure the printer terlah enter in service mode conditions.
How to Sign in to Service Mode iP2770:
The printer is off and the power cord is plugged in.
Press the RESUME button then press the POWER button until the green light is on (when pressing POWER button, RESUME button is removed first)
Then release the RESUME button, but do not release the POWER button.
While the POWER button is still depressed, press the RESUME button 5 times. Led will turn green orange with the last flame orange. Then ...
Release both buttons simultaneously.
Led will blink briefly then it will flame GREEN.
Computer will detect new device, ignore it ... ..
This indicates that the iP2770 printer is in a SERVICE MODE state and ready to reset.
How to Reset Canon iP2770 error 5200 on hardware:
Turn on the printer, and the printer will look normal.
Run printer to print document or print test, then error 5200 will appear.
Immediately unplug the power cord without pressing the on-off button
Open and slide the catridge to the middle manually (press the white lock latch on the back of the head, so the cartridge can be pulled to the center)
Unplug all cartridges and leave the lid open
Turn on the printer, the head will move crashing left and right because the lid is still open and will stop in the middle.
Reinstall the cartridge, and close it properly
Your printer will return to normal.
How to Reset Canon iP2770 Using Reseter Software
Service-tool-v3400.jpg
Make sure the printer conditions in the SERVICE MODE position as above, then run Software Resetter iP2770 v3400 that you downloaded:
Exctract File Resetter iP2770.
Prepare 2 papers in printer (this is for print at reset time).
Run the program Resetter iP2770
Click "SET" by setting the Clear Ink Counter Main position, then the printer will proceed, then iP2770 will print one page with the words "D = 000.0"
Click "SET" with the Ink Absorber Counter setting of Main position, then the printer will proceed, then click OK
Then click "EEPROM", and the printer will print the result of Resetter iP2770. One line of his writing as follows:
"TPAGE (TTL = 00000)"
Turn off the Printer by pressing POWER button.
Printer ready to diguankan
More details can read the full ip2770 canon error code
