Canon MP287 Printer Error Code and How to Fix it

Canon MP287 Printer Error Code and How to Fix it

Error Code Printer Canon MP287

How to repair damage Canon Pixma MP 287 Printer with Error Code displayed on Canon Printer MP 287 such as Printer Out Of Paper, Paper Jammed, The Ink Has Run Out. The Canon MP 277 Printer Error Code is the same as the Error code on the Canon MP 258 Printer, error code on PrinterCanon MP 287 All in One Multifunction is usually displayed on the LED in the Canon MP 287 Printer.

When an error occurs on the Canon MP 287 Printer the alarm light is lit yellow and will give rise to Letter E for Error with error code such as E 02, E05, E 08 and others or also accompanied by Letter P for Power with Error code such as P 02, P10. So after the display error code on the LED then check the Error Code on Canon MP 287 Printer.

Canon MP 287 Printer Error Code And How To Fix and Troubleshoot Canon MP 287 Printer;

Error Code E

E02: Printer is Out of Paper, paper does not go well

Solution:

Load paper correctly
E03: Paper Jammed, Paper Jam

Solution:

Reload Paper correctly.
Check if anything is blocking the entry of the paper
Check the paper roller whether it works properly or not
Check the reader of the paper sensor next to the paper roller, if damaged immediately replace
E04: The FINE Cartridge can not be recognized

Catridge canon MP287 is not installed properly

Solution:

Remove Catridge,
Clean it, keep plugging it in again
E05: The FINE Cartridge can not be recognized

Catridge is not installed completely, or there is one broken

Solution:

Remove the Catridge and clean it and then plug it in again.
Replace Catridge
E07: The FINE Cartridge is not installed in the correct position, The cartridge is not installed in the correct position

Solution:

Check that the Black / Color Cartridge is in the correct position.
Printer Need to be reset
E08: Ink absorber is almost full, Ink Absorber is almost full

Solution:

The printer needs to be reset with the software
E13 and E16: Ink has run out

Solution:

Press the STOP / RESUME button until the indicator display proceeds and shows the number 1
Button-resume-canon-mp287

Error Code P

P02: Carriage error

Solution:

Check the printer roll,
If there are foreign objects that enter
Clean the encoder
P03: Line feed error

Solution:

Check the disc sensor timing
Check and clean the mainboard
P05: ASF sensor error

Solution: Replace one of the parts:

ASF sensor unit
Motorcycle
Board
P06: Internal temperature error (excessive heat)

Solution:

Clean the inside of the printer,
Clean the sensor on the catrid,
Change board
P07: Full absorber ink

Solution:

Reset printer with program
P08: Print head temperature rise error (head overheated, over limit)

Solution:

Replace Catridge color
P09: EEPROM error

Solsui:

EEprom board corrupted,
Change board
P10 / B200: error uncertain due to the failure of parts in general
Cause: The catridge is left blank and is used for continuous printing. Consequently heat and damage occurs in one of the following components: Logic Board / Carriage Unit / Second Catridge.
Solution: Replace One of the above components of the order of the easiest and cheapest.

P15: USB VBUS over current

Cause: The printer is overcurrent from the Canon MP287 Printer USB cable.
Solution:
1. Try Replace USB Cable Printer Canon MP287.
2. If still damaged, replace Canon MP287 Printer Board.

P20: Other hardware error

Solution:

Other hardware damage
Change the mainboad
P22: Scanner error (Scaner not working)

Solution:

Replace the scanner
Replace board

For mp237 multifunctional canon type that does not have led can read 11 error code canon mp237 printer in the previous post.